The Guide to Replace Car LED Headlight Kit in Honda Civic
Today we’re going to install LED light bulbs into the low beams of my car. This is the LED light this is really cool, this is a beautiful design and it comes with a ballast. What I recommend is that you connect the two cable first and install the light bulb, the last thing you’ll do is plug the connector into the car.
This is where we will need to put this clip out, you push this clip down and then you go to pull the cord. Trying to grab it, just pull it out right there so it’s pretty simple. Next, push this clip in, and then you try to push down, it should pop right out. It’s clockwise or counterclockwise and you will turn the bulb out, and the OEM bulb just pops out like that turn pull it out pretty simple.
You’re gonna push that off and then if you see a pattern, it is what will fit into the light socket.
I’m just going to put this bulb in and then turn it, so that the led bulb goes inside, and then it’s just a twist. I made sure the bulb fit and I put it in and now you just twist to lock it in place.
The last step is so obviously you will have to clean this up a little bit. but I would probably mount it somewhere. You need to make sure you test the lights before you go ahead. I did the left one first that I knew what I was doing and now I will turn to the right one on.
There we go that is working and that is a huge freak indifference we’re gonna hopefully do the fog lights. We’re just gonna have to pull up the front bumper.